Filleted interior of bow.
Fitted bow plate and sanded to finished bow.
Fitted rear section of main cabin sole
Woo hoo!
This is the bow, the normally pointy end. The standard Paradox has a forward slanting bow, I wanted mine flush, vertical or bluff.
Next, I sanded the front face and fitted a half inch marine ply piece over the front. This added strength, but also sealed the plywood side panels from end grain assault as the boat moved through the water.
All this will be layered over by fibreglass anyway.
April 22.
Have now fitted storage bins in main saloon. These will provide extra strength to the hull assembly while flipping the hull.
No comments:
Post a Comment